FBJ33068 In room 109 someone put two screws to anchor the window so it cannot be opened. I repaired two toilet paper holders, one in the women's and men's restroom that was broken. (1 hour)
FBJ33068 I checked all the sprinklers and noticed one sprinkler was leaking and I tightened it up. (1 hour & 30 minutes)
FBJ33068 The wood strip was loose on the sacrament table and I glued back together. I lubricated the pulpit control and checked the satellite and sound system, it is all working good. (1 hour & 30 minutes)
FBJ33068 I adjusted the door at the northside at the end of the hall. I adjusted the screw by the bottom hinge of the door for it to shut properly. And checked all other doors and lubricate the locks and hinges and they are closing properly. (1 hour &30 minutes)
FBJ33364 The pulley was loose on the spinner of the vacuum cleaner, so I had to loosen the motor to take the belt off to loosen the pulley. I had to put some spacers in between the pulley and the shaft to tighten it back up with an alin wrench. Then I had to put the vacuum cleaner back together. ( 1 hour & 30 minutes)
I had to replace a door stop that was broken in the hall with another one. (30 minutes )
The lights in the chapel and cultural hall were all working good. The ballast in the men's restroom had a loose wirer that I repaired and the light is now working. ( 30 minutes)
Worked 8 hours,
Jeff
FBJ33068 In room 109 someone put two screws to anchor the window so it can not be opened.
I repaired two toilet paper holders, one in the women's and men's restroom that was broken.
I noticed one sprinkler was leaking and I tightened it up.
The wood strip was loose on the sacrament table and I glued back together.
I lubricated the pulpit control and checked the satellite and sound system, it is all working good.
I adjusted the door at the northside at the end of the hall. I adjusted the screw by the bottom hinge of the door for it to shut properly.
FBJ33364 The pulley was loose on the spinner of the vacuum cleaner, so I had to take it apart. I had to put some spacers in between the pulley and the shaft to tighten it back up with an alin wrench. Then I had to put the vacuum cleaner back together.
I had to replace a door stop that was broken in the hall with another one.
The lights in the chapel and cultural hall were all working good.
The ballast in the men's restroom had a loose wirer that I repaired and the light is now working.
No comments:
Post a Comment