On the Summer Grove Ward side of the building in the bishop's office I had to sand a few spots on the wall that had some little digs that was caused from the back of the chairs where I had to re mud it. After it dried I had to sand it and wipe the walls to get the dust off it and vacuum the floor before I could seal it with the primer sealer. Once the sealer was dry I used the roller to paint the second coat on the walls.
When I went back into the room to pull the tape off the wood trim I noticed a bubble in the paint behind the bishop's desk on the wall. I had to scrape the bubble out and wipe it down to clean it real good. Then I had to mud it again and let it dry.
In room 110 I had to mud some more digs and holes in the wall, let it dry, then sand it and wipe the wall real good to clean them and seal it with the primer sealer. It has to dry and I will paint it later.
Worked 8 hours,
Jeff
On the Summer Grove Ward side of the building in the bishop's office I had to sand a few spots on the wall that had some little digs that was caused from the back of the chairs where I had to re mud it. After it dried I had to sand it and wipe the walls to get the dust off it and vacuum the floor before I could seal it with the primer sealer. Once the sealer was dry I used the roller to paint the second coat on the walls.
When I went back into the room to pull the tape off the wood trim I noticed a bubble in the paint behind the bishop's desk on the wall. I had to scrape the bubble out and wipe it down to clean it real good. Then I had to mud it again and let it dry.
In room 110 I had to mud some more digs and holes in the wall, let it dry, then sand it and wipe the wall real good to clean them and seal it with the primer sealer. It has to dry and I will paint it later.
No comments:
Post a Comment